Voltage Regulator Home Resourceful information about voltage regulators.

Automatic Voltage Regulator The AVR will take in a wide range of voltage levels and will automatically output voltage with a much narrower range.

DC Voltage Regulator A DC adaptor that has a voltage regulator built into it.

Power Voltage Regulator These can correct power quality problems.

Generator Voltage Regulator They are used to increase the voltage in a generator.

Voltage Regulation To provide a near constant voltage in a wide range of load conditions.

High Voltage Regulator This type of voltage regulator will provide a full output at a lower rpm.

Line Voltage Regulator This type of voltage regulator will give a constant output voltage despite the fluctuations at its input.

Voltage Regulator Test Voltage regulators are a good tool to verify if an appliance or an electrical outlet is providing the power needed to operate your equipment.

AC Voltage Regulator This type of voltage regulator will provide precision input AC power.

High Voltage Regulator

We Recommend TEMCo to Buy Voltage Regulators.
Phone: 1-800-613-2290
Link: Voltage Regulator

When speaking of a high voltage regulator, high voltage should first be discussed. The term high voltage is generally speaking of electrical circuits where the voltage that is being used can be the cause for safety concerns and insulation requirements.

High voltages are used in electrical power distribution around the world and thus we have the high voltage regulator. The high voltage regulator does just what it implies to do. It will regulate the high voltage to a level that is safe. In the United States, anything over 600 volts is considered high voltage, however, voltages over 50 volts can cause dangerous amounts of current if a person touches two points of the circuit. Therefore, high safety standards on such high voltage circuits exist.

There are many high voltage regulators on the market today and they are all called different names. One high voltage regulator is the electromechanical regulator. They have been known to be used to regulate the voltage on AC power distribution lines. This type of high voltage regulator operates by selecting the appropriate tap that is on a transformer that has multiple taps. If the line output is too low, then the tap changer switches the connections to be able to produce a higher voltage. If the output voltage is too high, then the tap changer will switch the connections to make it a lower voltage. A high voltage regulator will provide an output sooner than a mechanical voltage regulator and also at a much lower rpm.

Another high voltage regulator is called the switching regulator. This type of high voltage regulator is used when power efficiency is critical, possibly as in a portable computer application. Switching regulators are used when the power supply is DC voltage and a much higher output voltage is required. They are capable of generating output voltages that are higher than the input voltages, or of opposite polarity. The switching high voltage regulator will rapidly switch a series device on and off. The charge that is being transferred to the load is determined by the duty cycle of the switch sets. It is also controlled by a feedback mechanism. The efficiency seen in the switching regulator is because the series element is either conducting fully or it is switched off as it dissipates almost no power.

A high voltage regulator can be found at TEMCo, a company that has been in business since 1968. Contact a TEMCo high voltage regulator specialist at 1-510-490-2187 or 1-800-613-2290 and experience a high quality product along with some of the best customer service in today's industry. The products found at TEMCo will always be priced competitively and their shipping is quick and reliable. TEMCo always stands behind their products by offering a quality warranty.

Remember to bookmark us: